|
Our Equipment
|
DIGITAL VIBRO-LIPO-SCULPTOR
Model VLE 0699-D
 |
|
* NOVEL DIGITAL ELECTRONIC CONTROLLED
VIBRATORY CANNULA SYSTEM
* NEWEST LIPOSCULPTURE SYSTEM
* EASES SURGICAL PROCEDURE LESSENING SURGEON'S PHYSICAL EFFORT
* REDUCES SURGICAL TIME LOWERING COSTS
* DIMINISHES BLEEDING AND ECHYMOSIS FORMATION
* PATIENT RECOVERING IN A SHORTER TIME
* IDEAL COMPLEMENT WITH
-VAC 1288-PC LIPOSUCTION UNIT
AND
-IFP INFILTRATION PUMP
CONFORMING THE VIBRO-LIPO-SET-PC
R&V Medical Equipments.
THE DIGITAL VIBRO-LIPO-SCULPTOR SYSTEM VLE 0699-D, HAS BEEN IMPROVED:
* INCORPORATING A NEW MICRO-MOTOR WITH A VERY HIGH POWER, REDUCING THE HAND PICE SIZE, MAKING THIS UNIT ALMOST TOTALLY SILENT WITH A VERY LOW VIBRATION TRANSMISSION COEFFICIENT AND A VERY LOW HEAT TRANSMISSION FACTOR.
* IT PERMITS TO WORK BETWEEN A RANGE OF 1500 AND 2000 VPM (VIBRATIONS PER MINUTE), INCREASING IN THAT WAY THE EFFICIENCY OF THE SYSTEM TO EXTRACT THE FAT FROM PATIENT BODY.
TECHNICAL FEATURES
 |
Handpiece
 |
Ergonomic light
handle |
|
High power with very low vibration transmission, heat transmission, and noise factors whcih makes it almost totally silent. |
|
Continuous range variable
speed between 1500 and 2000 VPM (vibrations per minute), increasing in that way the efficiency of the system to extract the fat from patient body. |
|
Supports for
mounting suction hose |
|
3 Mts. Length
controller connection cable |
|
Hand Piece and Footswitch connectors with protection cups to achive grate durability.
|
|
|
Cannula mounting
Interfase
|
With connection
port of suction hose |
|
|
Controller
|
Digital electronic hand piece engine speed
feedback control, which permits to work with a constant speed independently of mechanical load. |
|
Luminic indicator
of handpiece operation |
|
Liquid cristal alphanumerical display, which idicates the working speed range between 1.500 and 2.000 VPM, the hand piece state, the system state, and the pedal operation mode (DIRECT / STORED). |
|
Working speed programable through the front panel key board. |
|
Digital electronic control of footswitch operation in wo-modes: DIRECT / STORED selected through the front panel key board. |
|
Alarm system for overload and hand piece unplugged, visualized at the front panel alphanumerical display. |
|
Voltage: 110 / 120
Volts AC Other voltages upon request |
|
|
|
|